Many people today want their homes to have HVAC units. These units make sure homes stay at a temperature that is comfortable. Since the HVAC unit has machinery, the installation and maintenance will often require professional contractors or technicians. The following tips will help you understand how to handle your HVAC unit.
When you start making calls to get someone to help with your HVAC system, it’s a good idea to know what system you have before that phone call. Find out the brand and model and, if possible, dig out the maintenance history. This makes sure your contractor will be sufficiently prepared.
Don’t hire a contractor until you know a little about what you are facing. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have. It will be more difficult for him to assist you over the phone without the information readily available. So, know this information in advance.
Clean the coils and blades in your condenser at the beginning of summer. The power to the unit should be removed before you begin any maintenance, even cleaning. Remove leaves and debris from the condenser outside.
You should clean your condenser fan’s blades and coils every spring. Don’t forget to disconnect the power first. Take the grill off and pull the blades out to clean them.
Don’t get grass clippings on your outside unit. Now so the grass clippings are shot away from your unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
Lubricate your condenser yearly if it has oil ports. You can easily find the ports as they have a rubber or metal cap. Buy an SAE 20 product that is lightweight, and then put no more than ten drops into the ports.
Replace any single-paned windows with double-paned versions. During the summer, the use of double-pane windows will help keep the cool air locked inside of the home. Conversely, they keep warm air in during the winter.
Don’t let your home get overly hot. It is only possible for an air conditioner to lower the temperature in a home by 20 degrees F in a short time. If your home gets above 100 degrees Fahrenheit, you’ll only cool down to still above 80. Depending on what the humidity is, this may not be cool enough to be a safe temperature to sleep at when recovering from the harsh summer heat.
AC units will tend to get ice on them due to the cold. Drain lines can also suffer an occasional freeze, and these are sometimes mistaken for plumbing leak issues. If this happens, turn the thermostat so it is on fan only mode, which will disable the compressor. While switching the system to the fan setting should begin the ice melting process, the best thing to do is to hire a professional to deal with the problem.
Ask people you know for recommendations if you need to hire a contractor for an HVAC system. You should be able to find someone that has had a good experience. This will also help you to avoid undesirable companies.
Try to get as many quotes from contractors that you can. Making some phone calls before deciding is a good way to save money. Ideally, you should call five to six contractors to get a good idea of what a reasonable rate is.
Do you want to buy a new cooling and heating system? There are many things to consider. These machines are categorized according to the space they are able to efficiently heat and cool. You should buy a little bigger than necessary unit over a little smaller than necessary unit.
As this article shows, there are things which can be helpful when dealing with HVAC systems and contractors. Making certain that is operates optimally is a great idea. Use these tips to make sure you get the most from your HVAC unit.
Learn more information about air duct cleaners in Memphis Tennessee click here: Air Duct Cleaning Memphis